esphome:
  name: minir2watersensor

esp8266:
  board: esp8285

# Enable logging
logger:

# Enable Home Assistant API
api:
  password: ""

ota:
  password: ""

#Web server
web_server:
  port: 80

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Fallback Hotspot"

captive_portal:
    
status_led:
  pin:
    number: GPIO13
    inverted: true

output:
  - platform: gpio
    id: relay_1
    pin: GPIO12
switch:
  - platform: output
    id: switch_1
    name: "minir2 relay state"
    output: relay_1
    on_turn_on:
      - output.turn_on: relay_1
    on_turn_off:
      - output.turn_off: relay_1

binary_sensor:
  - platform: gpio
    pin: GPIO00
    id: reset
    internal: true
    filters:
      - invert:
      - delayed_off: 10ms
    on_press:
      - switch.toggle: 
          id: switch_1


  - platform: gpio
    id: water_1
    name: "Water tank"
    device_class: moisture
    pin: 
      number: GPIO04
      inverted: true
      mode: INPUT_PULLUP